Jende 1x4" Resin Diamond Sharpening Stone for KME Sharpener 3 Micron (6,000 Grit)

The 1x4 Jende Diamond Resin Stones for the KME Sharpener come in 15 Micron, 9 Micron, 6 Micron, and 3 Micron which are equivalent to 1K, 2K, 3K, and 6K grits, respectively. The diamond abrasive means they work on all steel types and even ceramic knives. In a sharpening porgression, the diamond resin stones are designed to do cleanup after the stock KME diamond plates and/or the Atoma 1x4 diamond plates and continue to a mirror polish in an all-diamond lineup. Abrasive Material: Diamond 15 Micron (~1000 grit) is an excellent cleanup stone to remove deeper scratches left by coarser plates and stones. It can also be used for routine maintenance and sharpening. This stone leaves a very good working sharp edge. 9 Micron (~2,000 grit) further refines the edges from the 15 micron diamond resin stone, and can be used for light repair and general maintenance sharpening. It leaves an even better quality work sharp edge. The 9 micron diamond resin stone also begins to polish, and sets things up for further refinement sharpening and polishing. 6 Micron (~3,000 grit) really begins to refine and polish the edge leaving a high level of sharpness and with some very good shine. The 6 micron diamond resin stone is best for maintenance sharpening and preparation for full out mirrors and further refinement. 3 Micron (~6,000 grit) is a keystone slicing edges and mirror polishing. It is an excellent touching up stone, and really sets the edge up for further refinement through finer grit stone, stropping or Jende diamond films.

• Abrades all steel types, even ceramics
• Splash and go and meant to be used with water
• 1x4" size fits the KME Sharpener
• For routine sharpening and maintenance.